Black icon of a laboratory flask with a side spout and liquid dripping out

Two-Inch Well Repair Services in Newaygo County AND ALL OF WEST MICHIGAN

We work on older two-inch wells across West Michigan, the kind of well most drillers won't touch anymore. Whether your jet pump has failed or you are noticing less flow than you are used to, we can diagnose the issue and give you an honest answer on the best way to proceed towards a solution.

Two-Inch Wells Are Built Differently From Modern Drilled Wells


A two-inch well is driven with a two-inch diameter steel casing, which is far narrower than the modern PVC drilled wells we install today. They were the standard choice for rural properties for decades, and thousands of them are still in active service on older homes and small farms.

Because the casing diameter is so small, two-inch wells rely on jet pumps rather than submersible pumps. The jet pump sits above ground, typically in a well house, basement, or utility room, and pulls water up through the narrow pipe using suction or down-pressure. This above-ground setup is one of the defining differences from a modern drilled well, and it creates its own set of service needs.

Repair Services We Provide for Two-Inch Wells

We've been working on two-inch wells in West Michigan long enough to know exactly what breaks down and why. Here's what we handle.


Jet pump service and replacement

We diagnose, repair, and replace above-ground jet pumps, including shallow-well and deep-well jet configurations.

Suction pipe repair

Compromised drop pipe can lead to a system that no longer pumps water. We inspect and replace the drop pipe with US-made steel.

Well screen replacement

A plugged screen is the most common cause of low water flow. We replace 2" screens.

When to Repair Your Two-Inch Well and When to Replace It


Not every two-inch well problem needs a full replacement. The right answer depends on the age of the system, the condition of the casing, and what you're trying to accomplish with the property. We give you both options honestly.

Black-and-white icon of a wheelchair with a toilet paper roll, indicating accessible restroom signage

Repair Is Usually the Right Call When...

  • The casing is intact and shows no signs of collapse or corrosion through the wall.
  • The jet pump has failed, but the well itself is still producing clean water.
  • The property is a seasonal or secondary use where a high-yield well isn't needed.
  • Budget constraints make a short-to-medium-term repair the more practical path.
Black recycling symbol made of three arrows on a white background

Replacement Makes More Sense When...

  • The casing is collapsed, severely corroded, or has failed to maintain its integrity.
  • Water quality testing shows persistent contamination that the shallow depth can't address.
  • The property's water demand has grown beyond what a two-inch system can deliver.
  • Repeated repair costs are approaching or exceeding the cost of a new installation.

If you're not sure which situation you're in, a site visit is the fastest way to find out. We'll tell you what we see and what it would take to fix it without any pressure.

Black chat bubble with a white question mark icon

Common Questions About Two-Inch Well Repair


  • How Much Does It Cost to Repair a Two-Inch Well?

    Two-inch well repair costs typically range from a few hundred dollars for a jet pump service or pipe fix to over a thousand dollars for a full pump replacement with a pressure tank. The exact cost depends on the component that's failed, parts availability, and site access. We provide estimates after a diagnosis.

  • Can a Two-Inch Well Use a Submersible Pump?

    No. A two-inch casing is too narrow to fit a submersible pump, which requires at least a three-inch casing diameter. Two-inch wells must use a jet pump installed above ground. If you need a submersible system, the well itself would need to be replaced with a larger-diameter drilled well.

  • How Long Do Two-Inch Wells Last?

    A well-maintained two-inch well can last 30 to 50 years or more, though casing condition, local geology, and water quality all affect service life. Many older properties still rely on functioning two-inch systems. 

  • What Causes Sand in the Water From a Two-Inch Well?

    Sand in the system usually indicates a hole in the casing or screen. A hole in the casing is not repairable.

  • Is It Worth Repairing an Old Two-Inch Well, or Should I Drill a New One?

    It depends on casing condition and your water needs. If the casing is intact and water quality is acceptable, repair is often the more cost-effective short-term choice. If the casing has failed or demand has outgrown the system's capacity, a new drilled well delivers better long-term value. We'll walk you through both.

Black phone handset icon with ringing signal lines

Get a Diagnosis for Your Two-Inch Well

Two-inch wells need a technician who knows how they work, and we've been working on them for generations. If your jet pump has stopped, your water looks off, or you're just not sure what's going on with the system, reach out. We'll take a look and give you a clear answer.